PDF(2763 KB)
PDF(2763 KB)
PDF(2763 KB)
一种输出电压可控的负电荷泵电路设计
Negative charge pump circuit design with controllable output voltage
为了解决电荷泵输出电压不可调的问题,设计了一种输出电压可控的电荷泵电路,该电路由高频振荡电路、负压产生电路、基准电路和反馈模块组成。与传统的电荷泵相比,输出电压更灵活,输出电压波纹更小,整体电路在东部0.18 μm CMOS工艺下完成。仿真结果表明,在输入电流为100 μA下,室温时,输出电压波纹在3 mV以内。在-40~125 ℃范围内,工艺角输出波纹在5 mV以内。该电荷泵电路在输出电压为-3~0 V工作稳定,已应用到轨对轨运放项目中。
To address the problem of non-adjustable output voltage in the charge pump, a charge pump circuit with controllable output voltage is designed. This circuit is composed of a high-frequency oscillation circuit, a negative voltage generating circuit, a reference circuit and a feedback module. Compared with traditional charge pumps, it exhibits greater flexibility in output voltage and a smaller output voltage ripple. The overall circuit is based on Dongbu HiTek 0.18 μm CMOS process. The simulation results show that with an input current of 100 μA, the output voltage ripple is within 3 mV at room temperature. Over the range from -40 ℃ to 125 ℃, the process angle output ripple is within 5 mV. The charge pump circuit operates stably at the output voltage of -3~0 V, and it has been applied to the rail-to-rail operational amplifier projects.
电荷泵 / 比较器 / 振荡器 / 电荷共享 / 数字修调技术
charge pumps / comparators / oscillator / charge sharing / digital trimming technology
| [1] |
|
| [2] |
刘泊志, 虞致国, 顾晓峰. 一种面向Flash存算阵列的可调电荷泵[J]. 微电子学, 2023, 53(5):861-868.
|
| [3] |
|
| [4] |
江军, 谢亮, 金湘亮. 一种低成本高精度环形振荡器的设计[J]. 中国集成电路, 2023, 32(Z1):41-45.
|
| [5] |
|
| [6] |
|
| [7] |
|
| [8] |
|
| [9] |
|
| [10] |
都文和, 杨占宇, 程秀娟, 等. 一种高电压转换倍率的电荷泵设计[J]. 微处理机, 2021, 42(4):1-4.
|
| [11] |
|
| [12] |
于云, 谢亮, 张文杰, 等. 一种高效低纹波双端输出的电荷泵设计[J]. 微电子学与计算机, 2021, 38(3):66-71.
|
| [13] |
万悦, 吕坚, 周云, 等. 一种具有对称结构的低损耗低纹波电荷泵[J]. 微处理机, 2018, 39(3):1-5.
|
/
| 〈 |
|
〉 |