高速成像中的阵列式高速脉冲光源设计

张学文, 刘吉, 武锦辉

集成电路与嵌入式系统 ›› 2022, Vol. 22 ›› Issue (11) : 38-41.

PDF(1922 KB)
PDF(1922 KB)
集成电路与嵌入式系统 ›› 2022, Vol. 22 ›› Issue (11) : 38-41.
技术纵横

高速成像中的阵列式高速脉冲光源设计

  • 张学文1, 刘吉1, 武锦辉2
作者信息 +

Design of Array High-speed Pulse Light Source in High-speed Imaging

  • Zhang Xuewen1, Liu Ji1, Wu Jinhui2
Author information +
文章历史 +

摘要

为了解决高速成像中自然照明不足、低幅率相机拍摄图像模糊等问题,设计了一种高亮度阵列式脉冲光源,该脉冲光源具有窄脉宽、高频率、照度均匀等优点,系统以大功率、高亮度白光LED为光源,以单片机为核心控制器,完成了脉冲光源驱动、精确时序控制、报警和显示等电路模块的设计。试验结果表明,该脉冲光源最大光通量可达36 000 lm,脉冲宽度为1 μs,可有效解决高速目标成像模糊的问题。

Abstract

In order to solve the problems of insufficient natural lighting and blurred images taken by low-amplitude cameras in high-speed imaging,a high-brightness array pulse light source is designed.The pulse light source has the advantages of narrow pulse width,high frequency and uniform illumination.The system adopts high-power high-brightness white LED as the light source,and MCU as the core controller.LED driving circuit,precise timing control,alarm and display circuit modules are designed.The experimental results show that the pulsed light source can reach 36 000 lm and the pulse width is 1 μs,which can effectively improve the problem of high-speed target imaging blur.

关键词

脉冲光源 / 高速成像 / 时序控制

Key words

pulse light source / high-speed imaging / sequential control

引用本文

导出引用
张学文, 刘吉, 武锦辉. 高速成像中的阵列式高速脉冲光源设计[J]. 集成电路与嵌入式系统. 2022, 22(11): 38-41
Zhang Xuewen, Liu Ji, Wu Jinhui. Design of Array High-speed Pulse Light Source in High-speed Imaging[J]. Integrated Circuits and Embedded Systems. 2022, 22(11): 38-41
中图分类号: TM923   

参考文献

[1] 王飞橙,轩建平,李新亮.基于FPGA的窄脉冲大电流LED频闪灯设计[J].机械与电子,2014(10):2225.
[2] 康继斌.脉冲式半导体激光器驱动源的设计[D].西安:西安电子科技大学,2011.
[3] 孙静,骆旭坤.高亮度LED闪光灯电源设计[J].中原工学院学报,2018,29(1):2226.
[4] 陈惠静,林家铸.LED闪光灯电源设计与实现[J].电子制作,2017(13):7072.
[5] 张宁.LED面光源均匀化方法[J].信息化研究,2012,38(3):4649,56.
[6] 巢渊,徐鹏,唐寒冰,等.视觉检测系统LED光源照度优化方法[J].红外与激光工程,2021,50(12):357368.
[7] 曾丽梅,苏昌林.电光源频闪测试技术研究[J].中国测试,2012,38(3):3438.
[8] 刘沁.大型LED方形阵列的照度均匀性[J].照明工程学报,2018,29(3):7277.
[9] 陈杉杉,张合,徐孝彬.激光引信窄脉冲光源驱动电路设计(英文)[J].红外与激光工程,2018,47(S1):2430.
[10] 孙彬.频闪成像与运动激励同步控制系统[D].天津:天津大学,2007.
[11] Chen J,Kang S,Xia W,et al.Design of Stroboscopic Light Source Used in Measurement for HighSpeed Motion Object[C]//2015 Fifth International Conference on Instrumentation & Measurement, Computer,Communication and Control (IMCCC).IEEE,2016.
[12] 张波,曹丰文,汪义旺.LED 路灯驱动及智能调光系统的研究与设计[J].照明工程学报,2011,22(4):7178
[13] 梁海坚,邓军,王高,等.高速摄影同步触发光源系统设计及应用[J].激光技术,2016,40(3):331334.
[14] 曾滢.基于无线通信的闪光灯控制系统设计[J].电子测试,2018(15):1819.
[15] 米阳.基于TMS320F2812的同步摄影控制系统研究[D].北京:中国科学院研究生院,2005.
[16] 武福存.多闪光高速阴影摄影机时序控制系统的设计和研究[D].南京:南京理工大学,2008.
[17] 王大伟,徐耀良,李渝曾,等.闪光灯在高速印刷机数字监控系统中的应用[J].上海大学学报(自然科学版),2006(1):9396.

PDF(1922 KB)

Accesses

Citation

Detail

段落导航
相关文章

/