本文设计开发了一种星型拓扑的国产化以太网交换系统。设计系统采用EEPROM的启动配置模式,实现多片交换芯片SF2507的启动和级联,该系统能够支持16路自适应以太网的交换和数据通信。本文设计的系统采用内置5端口的PHY收发器交换芯片,开发成本低、设计简单、使用便利。利用该系统对接16路网络摄像头同时进行测试验证,系统能够正常传输16路网络视频数据,满足设计指标和要求,为国产片化网络交换机系统的设计开发提供了一种解决方案。
Abstract
In the paper,a domestic Ethernet switching system with a star topology is designed.The system adopts the startup configuration mode of EEPROM to realize startup and cascade connection of multi-chip switching chip SF2507.The system can support 16-channel adaptive Ethernet exchange and data communication.This system adopts the switch chip with built-in 5-port PHY transceiver,which has low development cost,simple design and convenient use.The design indexes and requirements provide a solution for the design and development of the domestic chip network switching system.
关键词
星型拓扑 /
以太网 /
EEPROM /
SF2507 /
PHY收发器
Key words
star topology /
Ethernet /
EEPROM /
SF2507 /
PHY transceiver
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 王多.基于IEEE802.3标准的10M/100M以太网MAC控制器设计[D].无锡:江南大学,2013.
[2] 王宇,封安,张光辉.全国产化方案的千兆以太网设计[J].信息通信,2021(10):187-189.
[3] 顾双豪,韩崇伟,王天石.基于ARM的国产化以太网交换机设计[J].兵工自动化,2021,11(11):36-42.
[4] 聂琼,钱敏,丁杰.千兆自适应以太网交换机设计[J].通信技术,2011,44(1):132-134.
[5] 李吟,赵海涛.场景驱动的工业以太网交换机软件测评框架[J].计算机工程与设计,2016,37(11):2999-3006.
[6] 朱佳.一种用于1000BASE-X物理层的8B/10B编码器设计[J].电子与封装,2020,20(1):10204-1-4.
[7] 严力.基于千兆以太网的基带光纤拉远设计[D].武汉:华中科技大学,2011.
[8] 窦康.高速PCB的信号完整性分析与硬件设计[D].西安:西安电子科技大学,2016.