介绍了使用Zynq7020处理器和BCM5396交换芯片实现机载嵌入式数据交换模块,该设计包含硬件设计和驱动软件设计。该数据交换模块在某机载数据交换平台上得到应用验证。实际测试表明,该模块的数据交换性能和稳定性均满足设计要求。
Abstract
In the paper,an airborne embedded data switch board based on Zynq7020 and BCM5396 is designed,including hardware design and driver design.The data switching board has been applied and verified in an airborne data switch platform.The test results show that both the switch speed and the stability meet the design requirements.
关键词
Zynq7020 /
BCM5396 /
嵌入式数据交换板
Key words
Zynq7020 /
BCM5396 /
embedded data switching board
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 陈只明.工业以太网的研究现状及展望[J].化工自动化及仪表,2001,28(6):1-4.
[2] 周红玉.以太网交换机体系结构与实现技术分析[J].集美大学学报(自然科学版),2001(3):264.
[3] 于沣沨.通信工程中软交换技术的应用分析[J].信息周刊,2018(6):93.
[4] 金鑫.基于软交换的多媒体集群语音平台研究与实现[D].南京:南京邮电大学,2012:1-58.
[5] 陈刚,康林,陈航,等.基于FPGA的SRIO端点设计与实现[J].兵工自动化,2021,39(2):49-52.
[6] 白海斌,武宝刚,张晓宇.基于SRIO交换的分布式系统功能动态重构实现[J].计算机与网络,2021,44(2):55-57.
[7] 吴小涛.基于VLAN技术的网络通信系统设计[J].无线互联科技,2016(8):1-2.
[8] 戴余龙,李金彪.基于88E6185的千兆以太网交换设计[J].工业控制计算机,2017,8(30):24-27.