STM32+FPGA的导常振动信号采集存储系统*

刘培, 刘宾

集成电路与嵌入式系统 ›› 2022, Vol. 22 ›› Issue (4) : 61-64.

PDF(2361 KB)
PDF(2361 KB)
集成电路与嵌入式系统 ›› 2022, Vol. 22 ›› Issue (4) : 61-64.
新器件新技术

STM32+FPGA的导常振动信号采集存储系统*

  • 刘培, 刘宾
作者信息 +

Acquisition and Storage System for Conducting Vibration Signal Based on STM32 and FPGA

  • Liu Pei, Liu Bin
Author information +
文章历史 +

摘要

针对工厂重要设备运输途中可能损坏的情况,本文设计了一套采用STM32F103+FPGA框架的无线传输的振动信号采集存储系统,可以用于重要设备运输过程中异常振动的实时监测。首先将系统刚性连接在被运输设备上,通过三轴振动传感器获得振动数据,FPGA对数据进行采集、存储,STM32通过无线模块将数据发送至相应的上位机中、进行相应的振动参数判断,以确定设备的运输状态。振动台实验与实际碰撞实验结果证明,该无线三轴振动信号采集存储系统能够应用于运输设备的异常振动监测,且具有易安装、测量快速准确等特点。

Abstract

In view of the possible damage of important equipment in the factory duringtransportation,a wireless transmission vibration signal acquisition and storage system is designed using STM32F103+FPGA framework.It can be used for real-time monitoring of abnormal vibration during transportation of important equipment.Firstly,the system is rigidly connected to the transported equipment,the vibration data is obtained through the three-axis vibration sensor,the FPGA collects and stores the data,and the STM32 sends the data to the corresponding upper computer through the wireless module,and then performs the corresponding vibration parameter judge and determine the transportation status of the equipment.The shaking table experiment and actual collision experiment prove that the wireless three-axis vibration signal acquisition and storage system can be applied to abnormal vibration monitoring of transportation equipment.The system has the characteristics of easy installation,fast and accurate measurement.

关键词

无线传输 / FPGA / STM32F103 / 三轴加速度传感器 / 振动台

Key words

wireless transmission / FPGA / STM32F103 / three-axis acceleration sensor / vibrating table

引用本文

导出引用
刘培, 刘宾. STM32+FPGA的导常振动信号采集存储系统*[J]. 集成电路与嵌入式系统, 2022, 22(4): 61-64
Liu Pei, Liu Bin. Acquisition and Storage System for Conducting Vibration Signal Based on STM32 and FPGA[J]. Integrated Circuits and Embedded Systems, 2022, 22(4): 61-64
中图分类号: TN914   

参考文献

[1] 张勇.一种新型的三轴水平振动筛, CN213001174U[P].2021.
[2] 郭琛江.一种大件特种机械设备运输水陆联运用防碰撞结构,CN210654495U[P].2020.
[3] 刘必灯,邬玉斌,宋瑞祥,等.振动加速度采集存储系统,CN208444337U[P].2019.
[4] 陈伟琪,肖定邦,蒲金飞,等.MEMS振动传感器信号检测电路设计与实现[J].传感器与微系统,2021,40(7):4.
[5] 吕西林,邹昀,卢文胜,等.上海环球金融中心大厦结构模型振动台抗震试验[J].地震工程与工程振动,2004,24(3):7.
[6] 陈力.一种基于加速度传感器的高精度振动探测器技术研究[J].科学技术创新,2020(21):2.

基金

*山西省重大专项(20191102010)。
PDF(2361 KB)

57

Accesses

0

Citation

Detail

段落导航
相关文章

/