基于分布式DLL时序控制的高精度励磁电流控制系统设计

张德文, 张李晨曦, 秦莉雅, 张杰, 张鸿

集成电路与嵌入式系统 ›› 2026, Vol. 26 ›› Issue (2) : 24-33.

PDF(15499 KB)
PDF(15499 KB)
集成电路与嵌入式系统 ›› 2026, Vol. 26 ›› Issue (2) : 24-33. DOI: 10.20193/j.ices2097-4191.2025.0106
第九届全国大学生集成电路创新创业大赛优秀作品专刊

基于分布式DLL时序控制的高精度励磁电流控制系统设计

作者信息 +

High-precision excitation current control system based on distributed DLL timing control

Author information +
文章历史 +

摘要

针对旋转变压器励磁电流峰值控制对高精度的需求,设计并实现了基于分布式延迟锁相环(DLL)时序控制的高精度励磁电流峰值控制系统。通过在芯片中集成7档低失调高带宽可编程增益放大器(PGA)、13位基于混合时序逻辑的逐次逼近型模数转换器(SAR ADC)、采用双极调制架构的12位数字正弦脉宽调制(SPWM)模块以及3组DLL时序控制电路,构建了完整的闭环励磁电流控制系统,实现了对励磁电流峰值的精确采样与动态调节。实验结果表明,本设计输出的PWM波形具有1.3 ns的分辨率,能够在400 mA目标电流下实现励磁电流峰值误差小于±0.934%,为旋转变压器励磁电流峰值控制问题提供了一个有效的解决方案。

Abstract

To address the high-precision requirements for resolver excitation current peak control, this paper designs and implements a high-precision excitation current peak control system based on distributed Delay-Locked Loop (DLL) timing control. By integrating a 7-stage low-offset, high-bandwidth Programmable Gain Amplifier (PGA), a 13-bit hybrid-timing-logic-based Successive Approximation Register Analog-to-Digital Converter (SAR ADC), a 12-bit digital Sinusoidal Pulse Width Modulation (SPWM) module employing a bipolar modulation architecture, and three sets of DLL timing control circuits on-chip, a complete closed-loop excitation current control system is constructed. This system achieves precise sampling and dynamic adjustment of the excitation current peak. The experimental results demonstrate that the designed PWM waveform output achieves a resolution of 1.3 ns and an excitation current peak error of less than ±0.934% at a target current of 400 mA, providing an effective solution for resolver excitation current peak control.

关键词

励磁电流峰值控制 / PGA / 混合时序逻辑SAR ADC / 数字SPWM / 分布式DLL

Key words

excitation current peak control / PGA / hybrid timing logic SAR ADC / digital SPWM / distributed DLL

引用本文

导出引用
张德文, 张李晨曦, 秦莉雅, . 基于分布式DLL时序控制的高精度励磁电流控制系统设计[J]. 集成电路与嵌入式系统. 2026, 26(2): 24-33 https://doi.org/10.20193/j.ices2097-4191.2025.0106
ZHANG Dewen, ZHANG Lichenxi, QIN Liya, et al. High-precision excitation current control system based on distributed DLL timing control[J]. Integrated Circuits and Embedded Systems. 2026, 26(2): 24-33 https://doi.org/10.20193/j.ices2097-4191.2025.0106
中图分类号: TN453 (半导体混合集成电路)   

参考文献

[1]
于吉刚, 侯伟盟, 倪文龙. 基于GD32F407的国产化电机驱动系统设计[J]. 集成电路与嵌入式系统, 2024, 24(6):61-66.
摘要
本文设计了基于GD32F407的全国产化的电机驱动系统,该系统是定位定向导航系统应用中转位装置的重要组成部分,需要搭配转台使用,其主要功能是实现角位置传感器即旋转变压器激磁信号激励的产生,使用专用的调制解调位置信息芯片实现对电机旋转位置的精确判断,使用单片机实现信号处理、调制解调位置信息处理以及控制电机驱动芯片WSA67驱动电机完成转台的定向定量转位,转位过程中实现转台的稳速控制,同时通过隔离的串行接口完成与转台系统的数据传输等功能。
YU J G, HOU W M, NI W L. Design of a Localized Motor Drive System Based on GD32F407[J]. Integrated Circuits and Embedded Systems, 2024, 24(6):61-66(in Chinese).

In the paper,a domestic motor drive system is designed based on GD32F407.The system is an important part of the application transfer device of positioning directional navigation system and needs to be used with a turntable.Its main function is to generate excitation signals of angle position sensors,namely rotating transformers.The dedicated modulation and demodulation position information chip is used to accurately judge the rotating position of the motor,the single-chip microcomputer is used to realize signal processing,modulation and demodulation position information processing,and the motor driver chip WSA67 is used to drive the motor to complete directional quantitative rotation of the turntable,and the stable speed control of the turntable is realized in the process of rotation.At the same time,the data transmission with the turntable system is completed through the isolated serial interface.

[2]
王骋, 邓志全, 蔡骏, 等. 电机转子位置传感器的评述与发展趋势[J]. 微特电机, 2014, 42(3):64-71.
WANG C, DENG Z Q, CAI J, et al. Reviews and Development Trend of Rotor Position Sensors for Motors[J]. Micro-motor & Servo-technique, 2014, 42(3):64-71(in Chinese).
[3]
KIM S Y, PARK Y J, ALI I, et al. Design of a High Efficiency DC-DC Buck Converter With Two-Step Digital PWM and Low Power Self-Tracking Zero Current Detector for IoT Applications[J]. IEEE Transactions on Power Electronics, 2018, 33(2):1428-39.
[4]
KIM H, CHOI Y, KIM D, et al. A GaN-Based Digitally Controlled DC-DC Buck Converter with an ADC-Based Digital Controller and Soft-Start Function[C]// Proceedings of the 2024 IEEE International Conference on Consumer Electronics-Asia (ICCE-Asia),F 3-6 Nov.2024.
[5]
Microchip Technology. dsPIC33EPXXXGP50X Datasheet, 2010.
[6]
芯海科技. CS32G020Q数据手册, 2022.
Xinhai Technology. CS32G020Q Data Sheet, 2022(in Chinese).
[7]
薛士然. 芯海科技:做国内高精度MCU的领头羊[J]. 单片机与嵌入式系统应用, 2020, 20(2):91.
XUE S R. Chipsea Technology:Aiming to Be the Leader in Domestic High-Precision MCUs[J]. Microcontrollers & Embedded Systems, 2020, 20(2):91(in Chinese).
[8]
ZHANG W P, TONG X. Noise Modeling and Analysis of SAR ADCs[J]. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2015, 23(12):2922-2930.
[9]
ST microelectronics. STM32G474 Datasheet, 2021.
[10]
LIU C C, CHANG S J, HUANG G Y, et al. A 10b 100MS/s 1.13mW SAR ADC with binary-scaled error compensation[C]// Proceedings of the 2010 IEEE International Solid-State Circuits Conference - (ISSCC),F 7-11 Feb.2010.
[11]
YONGSAM M, JONGSANG C, KYEONGHO L, et al. An all-analog multiphase delay-locked loop using a replica delay line for wide-range operation and low-jitter performance[J]. IEEE Journal of Solid-State Circuits, 2000, 35(3):377-384.
[12]
CHENG J, SI L, ZHANG H, et al. A low-power clock generator based on digital DLL for high speed pipelined ADCs[C]// proceedings of the 2012 IEEE 11th International Conference on Solid-State and Integrated Circuit Technology, F 29 Oct.-1 Nov. 2012.
[13]
NXP Semiconductors. KV4x Data Sheet, 2019.

PDF(15499 KB)

Accesses

Citation

Detail

段落导航
相关文章

/