Optimization Design of Data Acquisition,Editing and Transmission System Based on Localization

Kang Jianzhou, Yan Shuai, Zhang Huixin, Liu Lisheng, Xue Weizhao

Integrated Circuits and Embedded Systems ›› 2023, Vol. 23 ›› Issue (11) : 83-87.

PDF(1380 KB)
PDF(1380 KB)
Integrated Circuits and Embedded Systems ›› 2023, Vol. 23 ›› Issue (11) : 83-87.
APPLICATION NOTES

Optimization Design of Data Acquisition,Editing and Transmission System Based on Localization

  • Kang Jianzhou1, Yan Shuai2, Zhang Huixin1, Liu Lisheng1, Xue Weizhao1
Author information +
History +

Abstract

In order to improve the reliability and transmission speed of the data editing and transmission system,a system of data editing and transmission based on localization is designed.The whole system takes the domestic FPGA as the control core and completes the instruction delivery and data reading of the upper computer through Ethernet.Finally,it connects to the acquisition module through high-speed serial communication and carries out data reading through Ethernet.The data reading speed can reach 600 Mb/s,which has been verified in the data recorder experiment of a monitoring console.By optimizing the communication mode,the transmission speed can reach 1.25 Gb/s.The IP multicast mode of the switch is mainly used to replace the point-to-point communication mode,so that the multi-platform machines can communicate with the data acquisition,transmission and storage system at different times and places,which improves the system flexibility and convenience,achieves the purpose of localization.

Key words

data collection and compilation / high-speed communication / FPGA

Cite this article

Download Citations
Kang Jianzhou, Yan Shuai, Zhang Huixin, Liu Lisheng, Xue Weizhao. Optimization Design of Data Acquisition,Editing and Transmission System Based on Localization[J]. Integrated Circuits and Embedded Systems. 2023, 23(11): 83-87

References

[1] 欧阳桃花.中国载人航天事业的科技探索与产业变革[J].人民论坛,2023(5):32-35.
[2] 田德福.基于多目标优化的在轨组装望远镜热设计研究[D].长春:中国科学院大学(中国科学院长春光学精密机械与物理研究所),2022.
[3] 陈慧,谭志强,鲍捷.基于北斗短报文通信的新能源监测系统设计[J].电测与仪表,2020,57(19):78-85.
[4] 张嘉璐.数据采集存储系统的设计与实现[D].太原:中北大学,2021.
[5] 王昶,何琪,周依芳.高端装备国产化替代应用的主要障碍与突破路径[J].科技导报,2023,41(6):13-20.
[6] 薛伟钊,张会新,郭瑞卿,等.高速通信平台的国产化设计及测试[J].仪表技术与传感器,2022(10):40-45,51.
[7] 柯建波.近期国产半导体设备的观察与思考[J].电子工艺技术,2021,42(5):249-254.
[8] 薛伟钊,张会新,郭瑞卿,等.高可靠性高速通信系统的国产化设计与实现[J].电子测量技术,2022,45(24):118-123.
[9] 孙晓磊,王红亮,陈航.基于FPGA的双FLASH数据记录器设计与实现[J].电子测量技术,2021,44(23):36-41.
[10] 顾青松,艾斯卡尔·艾木都拉,马博阳,等.基于MicroBlaze的时间触发以太网终端设计与实现[J].计算机测量与控制,2023,31(4):174-180.
[11] 董琳琳,任勇峰,王淑琴,等.通用型紧急指令传输接口优化设计[J].电测与仪表,2020,57(9):121-127.
[12] 郑永秋,王旋,刘亚兵,等.1 km以浅多参量混合编帧式数据采集系统设计[J].仪表技术与传感器,2022(2):65-69,74.
[13] 金吉良,彭书涛,朱云峰,等.安全稳定控制装置标准化测试系统研究与开发[J].电测与仪表,2022,59(11):147-154,175.
[14] 王勇,叶苗,何倩,等.基于软件定义网络和多属性决策的Ceph存储系统节点选择方法[J].计算机学报,2019,42(2):93-108.
[15] 王增辉,康剑飞,胡可心,等.一种多通道离散数据和图像数据高速同步采集与分析系统的设计与实现[J].中国仪器仪表,2021(8):70-76.
[16] 于波,李建成,张强,等.基于FPGA的振动采集监控系统[J].电子测量技术,2021,44(14):33-37.
PDF(1380 KB)

Accesses

Citation

Detail

Sections
Recommended

/