FPGA-Based Adaptive Priority Storage Control Method for Multi-Source Data

Integrated Circuits and Embedded Systems ›› 0

Integrated Circuits and Embedded Systems ›› 0 DOI: 10.20193/j.ices2097-4191.2026.0125

FPGA-Based Adaptive Priority Storage Control Method for Multi-Source Data

Author information +
History +

Abstract

Multi-source sensor data generated by UAVs exhibit significant differences in urgency and data volume, whereas existing onboard storage systems generally adopt a first-come, first-served scheduling strategy that treats all data equally. To address this limitation, this paper proposes an FPGA(Field-Programmable Gate Array)-based adaptive priority storage control method implemented entirely in hardware logic. The proposed method dynamically assigns priority levels and MLC (Multi-Level Cell) page allocation strategies by jointly considering port identifiers, data hotness, and chip utilization. Combined with parallel multi-chip scheduling and a preemption marking mechanism, it enables priority-aware write scheduling for multi-source data while complying with the non-interruptible programming constraint of NAND Flash pages. Simulation results demonstrate that the proposed method significantly improves the service rate of urgent data and reduces write latency under storage resource contention. The entire design is implemented using pure hardware logic on the FPGA with low hardware resource overhead, providing a lightweight and practical storage scheduling solution for UAV onboard storage systems.

Key words

FPGA / Multi-Source Data / NAND Flash / Adaptive Storage / UAV

Cite this article

Download Citations
FPGA-Based Adaptive Priority Storage Control Method for Multi-Source Data[J]. Integrated Circuits and Embedded Systems. 0 https://doi.org/10.20193/j.ices2097-4191.2026.0125

Accesses

Citation

Detail

Sections
Recommended

/

〈 〉